Lockdown 2

It’s nearly the end of April and the last few weeks have seen great changes and contrasts. The weather has switched from cold to hot and back to cold again with some welcome rain. Then it was hot again Spring flowers came out and then stuttered and slowly matured. The Bluebells have been at their most intense blue throughout the local woods. Honesty and Herb Robert compete on the grass verges. Suddenly, the Hawthorn is in flower and it’s not even May. And now it’s cold again with some welcome heavy rain.

There been little motor traffic and no aircraft, making the birdsong seem intense. Woodpeckers pounded themselves silly in the woods close by the boat shed and large bumble bees thundered around looking for who knows what. One came into the boatshed and disappeared into an empty post hole in the floor.

Despite all these distractions, the boat is coming into shape. Scantlings 1 have been glued along the outside top corners of each bulkhead, steam bent into shape at the bows.2  

The top plank (sorry, plank 3) was tack glued to this strip whilst cable ties held the bottom of it to plank 2. Similar wooden strips have been glued to the sides of the various bulkheads to provide resting places for the cockpit floor, the “capsize righting” tank and other buoyancy tanks.

Steaming with a stripper

The horizontal “decks” have been adjusted to fit and a start has been made with epoxy coating the insides of the ballast and buoyancy tanks. Now that the workshop is warmer (thanks to the weather), I’ve had to watch how long mixed epoxy lay unused and what sort of container it’s been in. On a couple of occasions, the container has been too deep and the material had been left unused for too long. The chemical reaction became strongly exothermic and let off visible fumes 3 and I had to hurriedly take the container outside.

Despite this, plank 3 has been glued in place, and the “capsize righting tank” has been painted internally and glued in place. I’ll explain all that in a later edition.  I still haven’t told you about the motor pod.

It will have to wait for the next edition.

Notes

1 Scantlings are thin strip that run longitudinally along the boat to provide form for the plywood planking. I called them stringers when building model aeroplanes several decades ago.

2 An elderly steam wallpaper stripper steamed merrily away for about 90 minutes for each scantling. By then the steamer was dry but the larch was wet and flexible.

3. No doubt toxic

2 thoughts on “Lockdown 2”

  1. Great to get an update and like the misuse of the wallpaper steamer 👍 shes looking very boatlike now and taking shape nicely. I did get a bit worried at the start as I thought you had turned into some sort of botanist ……but it did make an enjoyable read. Keep up the good work and looking forward to the next installment⛵️ ………lots of thoughts for boat names but not sure that ‘Social Distancing’ would strike the right sort of entente cordiale with the Sailing fraternity 😀

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.